Konica Minolta bizhub 362 - Manual (Page 190)

Setting up the VXL/VPS driver (Windows Vista/Server 2008) 7
362/282/222 7-8
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
2
Note
For custom sizes that are used often, it comes in handy if you add them
to the paper size list. Add a custom paper size from the Settings tab. For
details, refer to “Specifying the Settings tab settings” on page 7-36.
The “Save Custom Size” function is only available with the Windows Vis-
ta/Server 2008 PCL driver (VXL).
Selecting the paper tray
You can specify the paper you want to use for printing by selecting the paper
tray that contains the loaded paper.
1
Click the Basic tab.
2
From the “Paper Tray” drop-down list, select the desired paper tray.
2
Note
If “Auto” is specified as the paper tray, you can select the paper type. If
the paper tray setting is changed to a setting other than “Auto”, the paper
type is fixed to its preregistered setting. Specify a paper type by clicking
the [Paper Settings for Each Tray] button. For details, refer to “Specifying
the paper type for a paper tray” on page 7-8.
Specifying the paper type for a paper tray
You can specify the paper type for a paper tray.
1
Click the Basic tab.