Konica Minolta KIP 600 Scanner - Manual (Page 118)

Section 5 Scan Mode - Color 5-6
2. 0 Operation Details
2.1 Main Screen
On the lower region of the UI, select “SCAN” then select Color Mode in the upper left
corner.
This screen contains all user functions for scanning to file in color. The following pages
details the functions and settings of each button and sub screens that can be used to
adjust the scan parameters to achieve the required result.
2.2 Original
This region allows the setting of the Size Mode (Engineering or Architectural) and the
Original Document type.
2.2.1
Original Size Mode
This button is used to select the Size Mode of Engineering or Architectural.
This will allow the automatic width detection system to determine the image width when an
original is placed in the KIP 600.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architectural widths = 36, 30, 24, 18, 12, and 9 inches
2.2.2 Original
Type
Select one of the three different predetermined original types. The selections are:
a) Line - used for simple color line documents
b) Line / Photo - used for a combination of color lines & photos
c) Photo - used for color photographic originals