Konica Minolta KIP 600 Scanner - Manual (Page 22)

Part 1 Basic Functions 1-16
2. 3 Positioning Original
1. Slide Original Guides (1) to align them to the original width.
2. Place an original facing up on Original Table.
Insert the leading edge to Top Cover along with Original Guides.
1
NOTE
x Align an original to Original Guides to avoid skewing.
x Position an original in the center of Original Table. Not doing so may result in skewing.
x Do not place any objects except originals on Original Table. The scanner may catch
such objects and result in damage.
x When scanning originals as follows, removing Original Trays is recommended.
Original Trays may damage such object.
x Original in a carrier sheet
x Tough original (cannot be transported along with Original Tray)
Æ See [2. 6 Removing Original Tray].
x If the scanner does not carry an original,
x Wipe Sensors and remove dust on them. Æ See [4. 1. 2 Sensors].
x Check USB connection.