Konica Minolta bizhub PRESS C6000 User Manual

Upgrading the fiery pro, 80c-km or fiery pro, 60c-km color server to system version 2.0

Advertising
background image

Part Number: 45097576

February 17, 2011

Copyright 2011 © Electronics for Imaging, Inc.

*45097576*

Upgrading the Fiery PRO

80

80C-KM or

Fiery PRO

80

70-60C-KM Color Server to

System Version 2.0

Overview

This document describes how to upgrade the Fiery PRO

80

80C-KM or Fiery PRO

80

70-60C-KM Color Server to system software version 2.0.

Notify the network administrator at the customer site that some archived jobs may no longer
print after you install version 2.0 system software.

N

OTE

:

The term “Fiery PRO

80

” is used in this document to refer to the Fiery PRO

80

80C-KM

or Fiery PRO

80

70-60C-KM Color Server.

Contents of this kit

In addition to this document, this kit contains:

• Two 1GB DIMMs — for upgrading the memory from 2GB to 4GB.

• BIOS Upgrade CD — for upgrading the BIOS from version 1.31 to version 1.55.

• One-time use dongle — for upgrading the BIOS from version 1.31 to version1.55.

• Media Package

System Software Package — System Software version 2.0 for installation on the

Fiery PRO

80

following the BIOS upgrade procedure.

User Software Package — User Software for installation on client computers; User

documentation CD; printed release notes; additional documentation.

Procedures

The list below is a summary; see the complete procedures in the following pages.

To upgrade the Fiery PRO

80

, perform the following procedures in the order shown below.

1. Install the additional DIMMs (see

page 2

).

2. Upgrade the BIOS (see

page 3

).

3. Install system software (see

page 4

).

Installing system software deletes everything on the HDD. Coordinate with the network
administrator at the customer site before installing system software.

4. Verify the product upgrade (see

page 6

).

Advertising
This manual is related to the following products:
Table of contents