Konica Minolta bizhub PRESS C6000 - Manual (Page 6)

Page 6 of 7
Part Number: 45097576
7
13. If user documentation was stored on the Fiery PRO 80 , advise the site administrator to reinstall
the documentation files from the User Documentation CD.
14. Reinstall any required software patches:
Contact your authorized service/support center for a list of valid software patches. Some or all
of the patches listed on the Configuration page that you printed earlier may no longer be
valid. Before installing a patch, be sure to verify with your authorized service/support center
that it is valid for your system version. Installing an invalid patch may result in system
corruption.
Software patches may be accessed from one or more of the following locations:
• System Updates—Using the keyboard (if present), choose Start > All Programs > Fiery >
System Updates, and then click Check Now.
• Check for Product Updates—In a Web browser, connect to the IP address of the
Fiery PRO 80 , click the Configure tab, and then click Check for Product Updates.
15. Ask the network administrator to reinstall any custom simulations that may have been
deleted when you installed the software.
16. Print the Font List and ask the network administrator to reinstall any customer-supplied
fonts that may have been deleted when you installed the software.
Compare the new Font List with the old Font List that you printed before the software
installation. Any fonts that appear on the old Font List but not on the new Font List must be
reinstalled.
17. Ask the network administrator to import any archived jobs into the Fiery PRO 80 queue.
N OTE : Some archived jobs may no longer print after you install version 2.0 system software.
18. Remind the network administrator to install the latest user software onto all computers that
print to the Fiery PRO 80 .
Using incompatible versions of the system and user software may result in system problems.
The latest user software is provided on the User Software media included with this upgrade
kit.
T O VERIFY THE PRODUCT UPGRADE
• Print a Configuration page and verify the following:
• Server Info > Memory (MB) is approximately 4096.
• Server Info > Version is “2.0.”
• BIOS Setup > BIOS Version is “1.55.”