Konica Minolta bizhub C200 - Manual (Page 30)

C200 3-4
Easy installation using the installer (Windows) 3
– You can change the display language of the installation license agreement in the lower-right corner.
4
If the setup selection window appears, select "Install printers/MFPs", and then click the [Next] button.
The connected printers and MFP are detected.
5
Specify the printer/MFP.
– Select the machine that is detected automatically, and then click the [Next] button. Continue with
step 8.
– In addition to "Normal Printing" (Port 9100 and USB), "Internet Printing" (IPP) and "Secure Printing"
(IPPS) can be selected as the printing method. Secure Printing (IPPS) can be used when SSL is
enabled from Assistant tool for C200 and IPP is enabled.
– If the connection to the machine cannot be detected and the list is not displayed, select "Specify
the Printer/MFP Except for the Above. (IP Address, Host Name...)", and then click the [Refer to]
button. Continue with step 6.
– When the connection to the machine cannot be detected, the list is not displayed. If the printer
cannot be detected, turn the machine off, then on again.
When turning the power off, then on again, wait at least 10 seconds before turning the power on
again; otherwise, this machine may not function properly.
– When using Windows Vista/Server 2008, the IPPS connection can not be setup using the installer.
For using IPPS connection, setup the connection using the Add Printer Wizard. For details, refer to
"Network connection (IPP or IPPS)" on page 4-16 .