Konica Minolta bizhub C200 User Manual
Page 31
Advertising
C200
3-5
Easy installation using the installer (Windows)
3
6
Select the connecting method, and then click the [OK] button.
–
If connecting with Port9100, select "IP Address/IP Host Name" and type in the IP address.
–
When a message dialog box appears that indicates that the connector cannot be found, click the
[OK] button.
7
In the "Select Printer/MFP to Install" dialog box, click the [Next] button.
8
Check the installation settings.
–
To change the settings, click the [Installation Settings] button, and then continue with step 9.
–
If not changing the settings, continue with step 10.
9
Select the components to be installed, and then click the [OK] button.
–
For details on fax drivers, refer to the User’s Guide [Fax Driver Operations].
Advertising