Konica Minolta MAGICOLOR 2300 - Manual (Page 15)

Network Connection 1-9
4
If you don’t want to set the gateway, go to step 5.
If you want to set the gateway, follow these steps.
5
Save your configuration changes and make the printer ready for printing
again.
6
Print a configuration page to verify that the correct IP address, subnet
mask, and gateway have been set.
SUBNET MASK
xxx.xxx.xxx.xxx
Press this
key . . . (until) the message window displays . . .
GATEWAY
192.168.1.1
GATEWAY
192.168.1.1
Use the and keys to move to each of the four number triplets.
(Leading zeros of each triplet are automatically suppressed; for
example, “.001.” displays as “.1.”)
Use the and keys to increase or decrease each number.
GATEWAY
xxx.xxx.xxx.xxx
Press this
key . . . (until) the message window displays . . .
Press the Up key twice to return to
IDLE
MAGICOLOR 2300DL
Press this
key . . . (until) the message window displays . . .
MENU
NETWORK
MENU
SPECIAL PAGES
Press this
key . . . (until) the message window displays . . .