Gateway, Hw address, Dhcp/bootp – Konica Minolta MAGICOLOR 2300 User Manual
Page 20: Gateway 2-4 hw address 2-4 dhcp/bootp 2-4, Network menu 2-4 gateway hw address dhcp/bootp
Network Menu
2-4
Gateway
HW Address
DHCP/BOOTP
Purpose
Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left, and Right keys to move between
triplets.
Default
192.168.1.1
Notes
Leading zeros of each triplet are automatically suppressed;
for example, “.001” displays as “.1”
Purpose
Displays the Ethernet hardware address for this printer. It
cannot be changed.
Options
None
Default
Printer dependent
Purpose
If there is a DHCP or BOOTP server on the network,
specifies whether the IP address is automatically assigned
by the DHCP or BOOTP server and other network
information is loaded.
Options
DHCP Set: On
BOOTP Set: Off
DHCP Set: Off
BOOTP Set: On
DHCP Set: Off
BOOTP Set: Off
Default
DHCP Set: On, BOOTP Set: Off