Konica Minolta MAGICOLOR 2300 - Manual (Page 38)

Configuring the Printer 3-16
User Choice (shown above)
The System/User Choice window allows you to configure the following items:
Item Description
AutoContinue Specifies whether the printer should continue printing if
the correct media size is not loaded in the specified tray.
Choices: Off, On
Default: On
Configuration Menu Equivalent: Engine/Auto Continue
Chaining Tray Specifies whether the printer should switch to a different
tray (containing media of the same size and type of
media) and then continue printing if the specified tray runs
out of media.
Choices: Off, On
Default: On
Configuration Menu Equivalent: Engine/Chaining Tray
&'
This option is available only if the optional lower
feeder unit (Tray 2) is installed.
Energy Saver Sets the amount of time (in minutes) the printer waits
between print jobs before activating the Energy Saver
feature.
Values 120 and OFF display only on products for North
America.
Choices: 15, 30, 60, 120, OFF
Default: 30
Configuration Menu Equivalent: Engine/Energy Saver
Restore User
Default button Resets all Administrator Mode configuration settings to
their factory defaults.
Configuration Menu Equivalent: Engine/Service/Restore
User Default
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings for this window to their
factory defaults.
Log-out button Logs out of Administrator Mode and returns to User
Mode.