Konica Minolta bizhub C550 - Manual (Page 278)

Setting up the PPD driver (Mac OS X) 8
C550 8-18
2
Reminder
When printing a job that contains pages of different sizes and orientations
with the “Poster Mode” setting specified, images may be missing or over-
lapping when the document is printed.
The staple function is available only when the optional finisher is installed.
The hole punch function is available only when the punch kit or the Z fold-
ing unit is installed with the optional finisher.
The Center Staple and Fold function, Half-fold function and Tri-fold func-
tion are available only when optional finisher FS-608 is installed.
The Z-fold function is available only when the Z folding unit is installed
with the optional finisher.
2
Note
The staple and hole-punch position changes according to the binding
position specified from “Binding Position”.
The number of punch holes that can be selected may vary depending on
the punch kit that is installed.
The Center Staple and Fold function, Half-fold function or Tri-fold func-
tion cannot be specified when the staple or punch function is specified.
The center staple function and the thick paper function cannot be spec-
ified when finisher FS-608 is installed.
The Z-fold function cannot be specified when the Center Staple and Fold
function is specified.
To use the Z-fold function, set the “Paper Size” setting of the application
software or printer driver to the paper size value indicated in the setting
(Z-Fold (A3, B4, 11 × 17, 8K)/Z-Fold (8-1/2 × 14)) that is selected from the
drop-down list.