Konica Minolta bizhub C550 - Manual (Page 402)

Various settings 10
C550 10-49
Driver Password Encryption Setting
For the encryption common key for the password that is added to a print job,
you can specify whether to use the encryption key that was specified at the
factory or change it to a user-defined encryption password. (Default setting:
User Factory Default)
User-Defined: Specifies the encryption password. Enter an encryption pass-
word of 20 characters.
Use Factory Default: Uses the default encryption password (encryption key
[common key] that is already determined and that is not disclosed) that was
specified at the factory.
!
Detail
For details on displaying the Administrator Settings screen, refer to “To
display the Administrator Settings screen” on page 10-33.
Encryption can be performed with an encryption common key, however,
the passwords that can be used are the user password, account pass-
word, and the secured document password.
When specifying the encryption password with “User-Defined”, be sure
to specify “Encryption Key” in the printer driver. If the encryption pass-
word for this machine and the encryption key for the printer driver are dif-
ferent, the passwords do not match and printing cannot be performed.
When using OpenAPI, the encryption common key can be acquired from
this machine.
1
In the Administrator Settings screen, touch [Security Settings].
2
In the Security Settings screen, touch [Driver Password Encryption
Setting].