Konica Minolta magicolor 1680MF - Manual (Page 85)

Scanning With the Machine 6-8
Scanning With the Machine
The machine keys can be used to make scans. Scanning is performed with
the scan settings specified in LinkMagic. To change the scan settings, change
the settings in LinkMagic.
In order to perform this operation, the following requirements must be met.
z This machine is connected to a computer using a USB cable.
z The TWAIN scanner driver, the printer driver and LinkMagic (Windows
only) are installed on the computer.
z Either LinkMagic is activated or the LinkMagic icon appears in the
Windows notification area.
The scan data is saved in the folder specified with LinkMagic.
For details on LinkMagic, refer to the Reference Guide on the Documentation
CD/DVD.
"
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
"
Scanning with the original glass is possible only with A4-, A5-, B5
(JIS)-, Letter- or Statement-size documents.
Basic Scanning Operation
1
Position the document to be
scanned.
"
For details on positioning
the document, refer to
“Placing a Document to
be Copied” on page 3-19.
2
Press the Scan key to enter
Scan mode.
3
To scan color scans, press the Start-Color key. To scan monochrome
scans, press the Start-B&W key.
"
If the Stop/Reset key is pressed while scanning, JOB CANCEL
appears. To continue scanning, select NO . To stop scanning,
select
YES
.