Removing all toner cartridges, Removing all toner cartridges -10 – Konica Minolta magicolor 1680MF User Manual
Page 95
Replacing Consumables
7-10
16
Press the Stop/Reset key to reset the machine.
"
The machine must complete a calibration cycle after a toner car-
tridge has been replaced. If you open the scanner unit or front
cover before the machine is reset, the calibration stops, then starts
over again after the cover is closed.
Removing All Toner Cartridges
Note
Be careful not to spill toner while removing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
By selecting the
EJECT MODE
in the
PRINTER MODE menu, all toner car-
tridges can be removed.
Follow the procedure described below to use the EJECT MODE.
1
With the main screen displayed, press the * key to display the PRINTER
MODE screen.
2
Press the , key to select
T/C CHANGE
and then press the Select key.
3
Press the , key to select
EJECT MODE
and then press the Select key.
4
Open the front cover.
"
Before opening the front
cover, open Tray 1 if it is
not already open.