Konica Minolta magicolor 1680MF - Manual (Page 71)

Making Basic Copies 5-2
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
"
Before making copies, check that the Copy key is lit up in green. If the
key is not lit up in green, press the Copy key to enter Copy mode.
"
The default paper size setting can be changed with TRAY1 PAPER
SETUP in the UTILITY menu. For details, refer to “TRAY1 PAPER
SETUP Menu” on page 2-17.
If, while specifying settings, no key is pressed for the length of time specified
for
AUTO PANEL RESET , the entered settings are canceled and the main
screen (Copy mode) is displayed.
Basic Copy Operation
1
Position the document to be
copied.
"
For details on positioning
the document, refer to
“Placing a Document to
be Copied” on page 3-19.
2
Press the Copy key.
3
Specify the desired copy settings.
"
For details on specifying the copy mode and the copy density, refer
to “Specifying the Copy Quality Setting” on page 5-3.
For details on specifying the zoom ratio, refer to “Specifying the
Zoom Ratio” on page 5-4.
For details on ID card copying, repeat copying or poster copying,
refer to “Setting a Copy Function” on page 5-5.
4
Using the keypad, specify the desired number of copies.
"
If the number of copies was incorrectly entered, press the Back
key, and then specify the correct number of copies.