Konica Minolta BIZHUB C351 - Manual (Page 227)

Setting Up the PPD Driver (Mac OS X) 9
C351 9-14
Finishing
You can specify these options when using the staple or hole punch finisher
functions of this machine.
1
From the “File” menu, select “Print”.
2
Select “Finishing”.
3
Specify settings for the following:
Collate: Prints multiple copies in sets.
Offset: Specifies offset.
Duplex: Performs duplex printing.
Output Tray: Selects the output tray.
Binding Position: Specifies the binding position.
Combination: Specifies booklet printing.
Staple: Performs stapling.
Hole-Punch: Performs hole punching.
Fold: Performs folding. Use with “booklet” in “Combination”.
Center Erase: Does not print on the folded part of a document.