Konica Minolta BIZHUB C351 - Manual (Page 64)

Setting Up Network Printing 3
C351 3-9
5
Specify settings for the following:
SMB Print: Set whether to use the SMB printing service. Select “ON”
here.
NetBIOS Name: Specify the NetBIOS name (up to 15 characters, in-
cluding - only).
Print Service Name: Specify the printing service name (up to 12 char-
acters, excluding / \).
Work Group: Specify the work group name (up to 15 characters, ex-
cluding " \ ; : , * < > | + = ?).
6
To apply the settings, restart this machine (turn it off, then on again).
– When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.