Konica Minolta BIZHUB C351 - Manual (Page 124)

Setting Up the PCL Driver 5
C351 5-11
Stapling
Multiple-page documents can be stapled.
The staple function is available only when the optional finisher is installed.
1
Click the Setup tab.
2
Select the “Staple” check box.
3
From the drop-down list, specify the number of staples and the sta-
pling position.
2
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher FS-507 or
FS-603 is installed. When using optional finisher FS-603, the punch kit must
be installed.
1
Click the Setup tab.
2
Select the “Hole-Punch” check box.
3
From the drop-down list, specify the number of punched holes.