Konica Minolta BIZHUB C351 - Manual (Page 125)

Setting Up the PCL Driver 5
C351 5-12
Fold & Staple
You can specify the center binding process of a document.
1
Click the Setup tab.
2
Select the “Fold & Staple” check box.
3
To specify the settings in “Fold & Staple”, click the [Details] button, and
then specify the desired settings in the Fold & Staple Details dialog box
that appears.
Fold & Staple: Specifies to fold and staple a printed document.
Center Erase: Specifies not to print on the folded part of a document.
2
Note
The fold and staple function is available only when optional finisher FS-
603 is installed.