Center binding, Hole punching, Center binding -19 hole punching -19 – Konica Minolta BIZHUB C351 User Manual
Page 180
Setting Up the PostScript Driver (Windows)
6
C351
6-19
Center Binding
You can specify to center staple and fold a printed document.
1
Click the Layout tab.
2
From the “Center Staple and Fold” drop-down list, select “Center Sta-
ple and Fold”.
3
To avoid printing on the folded part of the document, select the “Center
Erase” check box.
2
Note
The center binding function is available only when optional finisher FS-
603 is installed.
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher FS-507 or
FS-603 is installed. When using optional finisher FS-603, the punch kit must
be installed.
1
Click the Layout tab.
2
From the “Hole-Punch” drop-down list, select the number of punched
holes.
2
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.