Konica Minolta bizhub PRO 1200P - Manual (Page 44)

5 Administrator Security Functions
38 bizhub PRO 1200P
5 Administrator Security Functions
The administrator turns Security Strengthen mode ON/OFF.
To do so, an 8-digit CE authentication password and Administrator pass-
word must be set for the machine. Ask your authorized service representa-
tive to set up an Administrator password. To change this password, the
administrator himself should operate the procedure described in POD Ad-
ministrator’s Reference of the User’s Guide - Main Body.
To protect data in the machine from access and tampering, it is recommend-
ed to designate an administrator and use Security Strengthen mode.
5.1 Turn Security Strengthen mode ON/OFF
The following is an explanation of how to turn Security Strengthen mode On/
Off.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are en-
tered and the [OK] is touched, the warning message “Password does not
match” will appear, and no key will work for five seconds. Enter the right
password after five seconds.
If authentication fails, the information will be saved in the audit log.
Procedure
1
Press [Utility/Counter] on the control panel.
The Utility Screen will be displayed.