Konica Minolta bizhub PRO 1200P - Manual (Page 52)

5 Administrator Security Functions
46 bizhub PRO 1200P
7
Touch [Current Password] to enter the password currently used, then
touch [OK].
The first password: 9-digit alphanumeric serial number of the main
body.
8
The main body serial number will be printed at the upper left on the Util-
ity Screen and the upper right corner of the audit log. For details, see
the next section “Print audit log” and page 60 for the sample log.
9
If authentication is succeeded, touch [New Password] to enter the new
password.
– The key will not be active until authentication is succeeded.
– If authentication fails, the information will be saved in the audit log.
– The current password cannot be used again as a new password.
– Touch [OK] to return to the previous screen.
10
Touch [Check Input] to re-enter the same password as above.
Touch [OK] to return to the previous screen.
11
Touch [OK].