Konica Minolta bizhub 601 - Manual (Page 123)

IC-208 9-14
Print function of Mac OS X 9
2
Note
When printing a job that contains pages of different sizes and orientations with the "Poster Mode"
setting specified, images may be missing or overlapping when the document is printed.
Function name Option Description
Print Type 1-Side, 2-Sided, Booklet Specifies duplex printing and booklet printing.
Binding Position Left stitch, right stitch, top stitch Specifies the binding position.
Combination/Post-
er Mode Off, 2 in 1, 2 Repeat, 2 Repeat Re-
versal, 2 Ч 2, 3 Ч 3, 4 Ч 4 When Combination (2 in 1, 2 Repeat, 2 Repeat Re-
versal) is specified, two consecutive pages or one
page and its copy (two pages in total) are printed col-
lectively on a sheet of paper.
When Poster Mode (2 x 2, 3 x 3, 4 x 4) is specified, a
single original is divided into multiple pages and print-
ed.
Overlap width line ON/OFF Specifies the presence of a poster mode overlap. This
setting can be specified when the "Poster Mode" set-
ting is other than "OFF".
Rotate _180 ON/OFF Rotates 180° to print.
Image Shift ON/OFF Prints by shifting the entire print image. The screen is
displayed when the setting is enabled and allows you
to set the detail of the shift length.
Front Side/Back Side Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Chapters ON/OFF Specifies the page to be printed on the front side. The
screen is displayed when the setting is enabled and al-
lows you to set the page.
You can specify it when the print type is "2-sided" or
"Booklet".
Page Number Specifies the page to be printed on the front side
when "Chapters" is selected.