Konica Minolta bizhub 601 - Manual (Page 38)

IC-208 4-3
Manual installation using the Add Printer wizard 4
4
Click the [Next] button.
5
Select "Local printer attached to this computer", and then click the [Next] button.
– Clear the "Automatically detect and install my Plug and Play printer" check box.
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select "Standard TCP/IP Port" for "Type of port:".
7
Click the [Next] button.
The Add Standard TCP/IP Printer Port Wizard starts.
8
Click the [Next] button.
9
In the "Printer Name or IP address" box, enter the IP address for this machine, and then click the [Next]
button.
– If the Additional Port Information Required dialog box appears, go to step 10.