Konica Minolta bizhub 601 - Manual (Page 73)

IC-208 5-6
Installation on Macintosh computers 5
2
Note
If the Installable Options window appears, proceed to change the option settings as necessary. For
details, refer to
"Initializing the printer driver" on page 9-4 .
For OS X 10.4, you can also add a printer by clicking [Add] in the Printer Setup Utility window.
Specifying the LPR settings
Specifying the TCP/IP setting for this machine
Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].
LPD setting for this machine
To use LPR printing, enable LPD print in the LPD Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
The Ethernet setting window appears.
– For OS X 10.4, select "Built-in Ethernet", and then click the [Configure] button.
– For OS X 10.5/10.6, select "Ethernet", and then click the [Advanced] button.
4
Click the TCP/IP tab.
5
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the "This service has unsaved changes" message appears, click the [Apply] button.
Adding a printer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Print & Fax" icon.
3
Click [+] in the Print & Fax window.
– If available printers have already been set up, the Add Printer dialog box does not appear.
4
Click the [IP] button or the [IP Printer] button.
5
From "Protocol", select "LPD".
6
In "Address", enter the IP address of this machine.
– After the printer driver is selected automatically, go to Step 8.
– If an incorrect printer driver is selected, go to Step 7.
7
Select the desired printer driver manually.