Konica Minolta bizhub 601 - Manual (Page 46)

IC-208 4-11
Manual installation using the Add Printer wizard 4
4.2 Windows Vista/Server 2008/7
4.2.1 Network connection (LPR, Port9100, or SMB)
In Windows Vista/Server 2008/7, the printer driver can be installed either by searching printers on the
network, or by creating a new printer port.
Specifying the TCP/IP setting for this machine
Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].
2
Note
When using the IPv6 protocol, the Direct Hosting Setting on the machine must be enabled. For details,
refer to the User’s Guide [Network Administrator].
RAW port number setting for this machine
To use Port9100 printing, enable the RAW port number (9100 at default), in the TCP/IP Setting screen of this
machine.
!
Detail
For details on specifying the RAW port number of this machine, refer to the User’s Guide [Network
Administrator].
LPD setting for this machine
To use LPR printing, enable LPD print in the LPD Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].
SMB setting for this machine
In "Print Setting" in the SMB Setting screen of this machine, specify the NetBIOS name, print service name,
and workgroup.
!
Detail
For details on the SMB settings of this machine, refer to the User’s Guide [Network Administrator].
Printer driver installation by searching printers using the "Add Printer"
2
Note
When installing on Windows Vista/Server 2008/7, administrator permissions are required.
Printers will be found during installation. Connect this machine to the network, and then turn on the
power.
1
Insert the Driver CD into the CD-ROM drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
Select the desired printer function in "Hardware and Sound".
– In Windows Vista/Server 2008, click "Printers" in "Hardware and Sound". If Control Panel is
displayed in Classic View, double-click "Printers".