Specifying the lpr settings, Specifying the lpr settings -11 – Konica Minolta bizhub 601 User Manual

Page 78

Advertising
background image

IC-208

5-11

Installation on Macintosh computers

5

3

Select "AppleTalk" for the connection method, and then select the zone to which this machine is
connected.

If the printer is not detected, turn off this machine, then on again.

When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.

The connected printers are detected.

4

From the "Name" list, select the desired model name.

5

Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of model names,
and then click the [Add] button.

If the selected printer is registered in the printer list, the setting procedure is completed.

Specifying the LPR settings

Specifying the TCP/IP setting for this machine

Specify the IP address of this machine.

!

Detail

For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].

LPD setting for this machine

To use LPR printing, enable LPD print in the LPD Setting screen of this machine.

!

Detail

For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].

Specifying the TCP/IP setting for the computer

Specify the TCP/IP setting for the Macintosh computer connected to this machine.

1

On the "Apple" menu, select "System Preferences".

2

Click the "Network" icon.

3

From "Show", select "Built-in Ethernet".

4

Click the TCP/IP tab.

5

Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.

Advertising
This manual is related to the following products: