Konica Minolta bizhub C451 - Manual (Page 66)

Using copy functions 2
C451 2-23
Using copy f
unct
ions
Chapter 2
*1
If no finisher or separator is installed and all of the
following conditions are met, printed copies can be
fed out and sorted in an alternating crisscross
pattern.
– 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size)
paper is used.
– Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
– The “Auto” Paper setting is selected.
– The “Auto” Paper setting is not selected when the
“Mixed Original” setting is selected.
*2
If a Staple setting is selected, the “Collate (By Set)”
setting is automatically selected. The “Offset”
setting cannot be selected at the same time that a
Staple setting is selected.
*3
The Staple settings are available only if the optional
finisher is installed.
*4
The Punch settings are available only if punch kit
PK-512 is installed on optional finisher FS-608 or
finisher FS-517 or if punch kit PK-515 is installed on
finisher FS-519.
Center Staple
*7
Select this setting to staple copies at two
places along the center.
Setting Description