Document Outline

• Configuration and Usage of this Guide
  • HTML User's Guide operating environment
    • Supported Operating Systems/Browsers
    • Display resolution
  • How to display the top page of the HTML User's Guide
    • In a Windows environment
    • In a Macintosh environment
  • Conventions used in this guide
• Make a Note about This Machine Information
  • Checking the mounted optional devices
  • Checking network information
    • Printing out the Configuration Page Print
• Contents
• 1 Before Getting Started
  • 1.1 Turning the Power ON/OFF
    • Power supply
    • Turning the power on
    • Turning the power off
    • Power saving function
  • 1.2 Available Operations in this Machine
    • Major functions of this machine
      • Print functions
      • Copy functions
      • Scan functions
      • Hold function of print jobs using the HDD
      • Device control function (PageScope Web Connection)
    • Application functions
      • Color management function (Color Centro)
      • Job management function (Job Centro)
      • Other applications
• 2 Let's Make Prints
  • 2.1 Printing Flow
    • Step 1: Prepare the printer driver and applications
    • Step 2: Load paper into a tray
    • Step 3: Configure information of the paper loaded into a tray in this machine
    • Step 4: Use the printer driver to print data
    • Step 5: Check the finishing
• 3 Installing Software
  • 3.1 Installing the Printer Driver
    • Operating environment
      • In a Windows environment
      • In a Macintosh environment
    • Characteristics of printer driver
    • In a Windows environment
      • Installation
      • Default setting
    • In a Macintosh environment
      • Installation
      • Default setting
  • 3.2 Installing Applications
    • Operating environment
      • Color Centro
      • Job Centro
    • Color Centro setup
      • Function overview
      • Installation
      • Start
    • Job Centro setup
      • Function overview
      • Installation
      • Start
• 4 Basic Operations
  • 4.1 Loading Paper
    • Loading paper into the Paper Feeder Unit PF-708
    • Loading Paper in Post Inserter of Folding Unit FD-503
  • 4.2 Paper Setting
    • Specifying paper information for a tray
  • 4.3 Printer Driver Setting
    • Printer driver functions
      • [Color Mode]: Select an output color
      • [Color Mode]: 2-Color Printing
      • [Management]: Color Configuration
      • [Management]: Manual setting of a color conversion
• 5 Maintaining the Finishing Quality
  • 5.1 Both Sides Adjustment
    • Both Sides Adjustment
    • Adjustment flow
    • Making the Both Sides Adjustment for each tray
      • Chart Adjustment
      • Zoom and Image Shift Adjustment
  • 5.2 Image Quality Adjustment
    • Image Quality adjustment
    • Daily image quality management (Calibration)
      • Calibration timing
      • Executing calibration
    • Color Density Control
      • Auto setting of Color Density Control
      • Manual setting of Color Density Manual Control
    • Executing calibration using the image controller
    • Specifying the reference image quality
    • Particular adjustment
  • 5.3 Adjusting the Finisher and Saddle Stitcher
    • Opening the screen to be adjusted
      • Adjustable settings
• 6 Troubleshooting
  • 6.1 Replenish and Replace Consumables
    • Replacing a toner bottle
    • Replacing a staple cartridge
    • Replacing a waste toner box
  • 6.2 Clearing Paper Jams
    • How to view the animation guide
      • [JAM Position] screen
      • Illustration screen for Jam handling
  • 6.3 If the Specified Paper is not Found
    • Replacing with the specified paper
    • Forcibly printing using the loaded paper
  • 6.4 If an Error has been Displayed during Scanning
    • HDD space insufficiency
  • 6.5 Hue Adjustment
    • When calibration is executed for daily management
    • When calibration is not executed
  • 6.6 Image Position Adjustment
• 7 Appendix
  • 7.1 Good Use of the HTML User's Guide
    • (1) Let's master the search function!
    • (2) Confirm the setting required for the target finishing in an operation example!
  • 7.2 Name of each Component
    • External components
    • Internal components
    • Control Panel Layout
  • 7.3 Convenient Use of Scan Function (Scan to SMB)
    • Step 1: Prepare the destination computer
      • In a Windows environment
      • In a Macintosh environment
    • Step 2: Connect this machine to the network
    • Step 3: Prepare the operating environment for SMB transmission
    • Step 4: Configure settings according to your environment
    • Step 5: Send scan data to a public folder
  • 7.4 Major Specifications
    • Machine
    • Feeding-related optional devices
      • Paper Feeder Unit PF-707
      • Paper Feeder Unit PF-708
      • Post Inserter (Folding Unit FD-503)
      • Post Inserter PI-502
    • Output-related optional devices
      • Relay Unit RU-511
      • Relay Unit RU-510
      • Folding Unit FD-503
      • Large Capacity Stacker LS-506
      • Saddle Stitcher SD-506
      • Perfect Binder PB-503
      • Finisher FS-532
      • Multi Puncher GP-501
      • Auto Ring Binder GP-502
    • Electronic optional devices
      • Image Controller IC-602
      • Image Controller IC-308
      • Image Controller IC-310
      • Authentication Unit AU-201
    • Original-related optional devices
      • Reverse Automatic Document Feeder (ADF)
  • 7.5 Weight for each size
    • Weight for each size
  • 7.6 Maximum paper size and printing area