Konica Minolta bizhub 360 - Manual (Page 140)

Specifying Settings From the Control Panel 3
bizhub 360 3-15
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
14
Touch [OK].
If the first character of the name is a letter, the first character is auto-
matically registered as the indexing character.
15
Touch [Index] and touch the desired button.
– This specifies the characters used to index the destination.
– For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
16
Touch [OK].
17
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the port number (between 1 and 65535).
– To enable PASV mode, touch [PASV Mode].
– To use a proxy server, touch [Proxy].
– If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
18
Touch [OK].
The FTP destination is registered.