Konica Minolta bizhub 360 - Manual (Page 91)

2 Scanning Documents
2-56 bizhub 360
Scan
nin
g
Do
cu
men
ts
Chapter 2
5
Select the desired zoom ratio type, and then use the keypad to specify
the zoom ratio.
– To enlarge or reduce the scan at a zoom ratio that is the same hor-
izontally and vertically, select a zoom ratio for “Zoom with Constant
X and Y Ratio”.
– To enlarge or reduce the X and Y directions at different ratios, touch
[X] or [Y] below “Individual Zoom”, and then specify the corre-
sponding zoom ratios.
– To change the zoom ratio for one of the Set Zoom buttons, touch
[Set Zoom]. Three zoom ratios can be stored. In addition, the “Min-
imal” zoom ratio can be changed.
6
Touch [OK], and then touch [OK] in the next two screens that appear.