Konica Minolta bizhub 360 - Manual (Page 37)

2 Scanning Documents
2-2 bizhub 360
Scan
nin
g
Do
cu
men
ts
Chapter 2
2 Scanning Documents
2.1 Control Panel
1 2 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22 23 24
3
No. Name Description
1 [Power Save] key Press to enter Low Power mode.
While the machine is in Low Power mode, the indicator
on the [Power Save] key lights up in green and the
touch panel goes off. To cancel Low Power mode,
press the [Power Save] key again.
2 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the
panel.
3 [Access] key If user authentication or account track settings have
been applied, press this key after entering the user
name and password (for user authentication) or the ac-
count name and password (for account track) in order
to use this machine.
4 [Box] key Press to enter Box mode.
While the machine is in Box mode, the indicator on the
[Box] key lights up in green. For details, refer to the Us-
er's Guide (Box Operations).
5 [Fax] key Press to enter Fax mode.
While the machine is in Fax mode, the indicator on the
[Fax] key lights up in green. For details, refer to the Us-
er’s Guide [Facsimile Operations].
6 [Scan] key Press to enter Scan mode.
While the machine is in Scan mode, the indicator on
the [Scan] key lights up in green.