Konica Minolta bizhub PRESS 2250P User Manual
Page 50
3-4
bizhub PRESS 2250P
[01 Both Sides Max. Dens. Manual]
3
3.1
5
Select a tray key of the desired paper size.
If you select a paper size which is not supported, a prompt asking you to change the size will be dis-
played.
6
Press Start on the control panel. A sample pattern will be output.
7
Press [Close] to restore the Both Sides Maximum Density Manual Adj. Screen.
8
If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data.
% Adjustable range: -5 (lighter) to 3 (darker)
% Use[+<->-] to specify the value to be positive or negative.
9
Press [Main Body 1] or [Main Body 2] to select the object of adjustment, then press [Set] to change the
setting with the current value.
10
Repeat the steps from 3 to 9 until the desired result is obtained.
11
Press [Return] to restore the Adjustment Menu Screen.