Konica Minolta bizhub PRESS 2250P - Manual (Page 35)

bizhub PRESS 2250P 2-27
2.7 Using Machine When Power Save LED Lights 2
2.7.2 Automatically Conserving Energy: Auto Low Power
Auto Low Power conserves energy by lowering the power consumption.
This function is activated automatically after a specified period of machine inactivity (factory default is 1 min-
ute), with the Power Save LED lit, touch panel turned off, and all other LEDs except Start LED on the con-
trol panel turned off. The Start LED turns red, while the Power LED keeps green.
If the same period of time is specified for Auto Low Power and Auto Shut OFF, the machine power will be
shut off. The touch panel will not go off if the Jam Position Screen or screen to operate duplex printing is
displayed.
d
Reference
The Utility Menu Screen allows you to change the set period of time for Auto Low Power (to 1 minute, 3 min-
utes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes).
To exit Auto Low Power
%
Press any key on the touch panel or the control panel.
The machine returns to be ready for printing.
2.7.3 Automatically Conserving Energy: Auto Shut OFF
Auto Shut OFF achieves further energy conservation by reducing power consumption.
This function is activated automatically after a specified period of machine inactivity (factory default is 15 min-
utes), with the Power Save LED lit and all the LEDs on the touch panel and the control panel turned off.
The Power LED keeps green.
d
Reference
The Utility Menu Screen allows you to deactivate Auto Shut OFF or change the set period of time (to --- minute
(OFF), 1 minute, 3 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 min-
utes, or 240 minutes).
To exit Auto Shut OFF
%
Press Power Save on the control panel.
The machine returns to be ready for printing.