Konica Minolta bizhub C451 - Manual (Page 196)

Administrator mode 3
C451 3-87
Item Description
E-mail RX Setting Select whether or not e-mail is received.
POP Server Address Type in the address of the reception POP server. (Format:
***.***.***.*** or FQ DN: Range for ***: 0 to 255) To type in a host
name, select the “Please check to enter host name.” check box.
If the machine is set to use IPv6, an IPv6 address can also be
specified.
Before entering a host name, check that the DNS setting is cor-
rectly specified. For details, refer to “TCP/IP Setting - TCP/IP
Setting” on page 3-80.
Login Name Type in the logon name for the POP server (up to 63 characters).
Password Type in the password for logging on to the POP server (up to 15
characters).
APOP Authentication Select whether or not APOP authentication is used.
MDN Response Select whether MDN response is turned on or off.
Connection Timeout Specify the amount of time until communication with the server
times out.
Port Number Type in the port number for the server. (Range: 1 to 65535)
Use SSL/TLS
Port No. (SSL) Select whether or not SSL/TLS is used. To use SSL/TLS, select
the check box, and then type in the port number. (Range: 1 to
65535)
Check for New Messages Specify whether or not the server is automatically checked for re-
ceived e-mail messages. This appears if the Internet fax opera-
tion can be used.