Konica Minolta bizhub C451 - Manual (Page 211)

Administrator mode 3
C451 3-102
2
Note
If “Enhanced Security Mode” is set to enable, the community name for
the SNMP v1/v2c settings will be displayed. In addition, “Authentication
OFF” cannot be selected beside “Write User Name” - “Security Level”
under “SNMP v3 Setting”.
SNMP v3 Setting Specify settings for SNMP v3.
Context Name Specify the context name (up to 63 characters).
Discovery User Name Specify the user name for detection (up to 32 characters).
Read User Name Specify the name of read only user (up to 32 characters).
Security Level Specify the security level for read only user.
auth-password Specify the read only user authentication password to be used for
authentication (up to 32 characters).
priv-password Specify the read only user privacy password to be used for privacy
(encryption) (up to 32 characters).
Write User Name Specify the reading/writing user name (up to 32 characters).
Security Level Specify the security level for reading/writing user.
auth-password Specify the reading/writing user authentication password to be
used for authentication (up to 32 characters).
priv-password Specify the reading/writing user privacy password to be used for
privacy (encryption) (up to 32 characters).
Encryption Algorithm Specify the encryption algorithm.
Authentication Method Specify the authentication method.
TRAP Setting Select whether or not to permit the TRAP settings and whether to
enable or disable the TRAP settings when authentication failed.
Item Description