Konica Minolta bizhub C451 - Manual (Page 205)

Administrator mode 3
C451 3-96
Setting Up LDAP
Item Description
No. Displays the number of the LDAP server.
LDAP Server Name Type in the name of the LDAP server.
Server Address Type in the address of the LDAP server. (Format: ***.***.***.*** or
FQDN: Range for ***: 0 to 255) The only symbols that can be used
are the dash (-) and period (.). To type in a host name, check the
“Please check to enter host name.” check box. If the machine is set
to use IPv6, an IPv6 address can also be specified.
Port Number Type in the port number to be used for communication with the
LDAP server. (Range: 1 to 65535)
Enable SSL
Port Number (SSL) Select whether or not to use SSL/TLS to communicate with the
LDAP server.
Search Base Specify the starting point for LDAP searches (up to 255 characters).