Konica Minolta bizhub C451 - Manual (Page 214)

Administrator mode 3
C451 3-105
SMB Setting - Print Setting
Specify the settings for SMB printing.
2
Reminder
In order to apply the changes to the settings for “NetBIOS Name”, “Print
Service Name”, and “Workgroup”, restart the machine (turn it off, then on
again).
When the machine is turned off, then on again, turn the machine off with
the sub power switch before turning off the main power switch. In addi-
tion, wait at least 10 seconds to turn the machine on after turning it off;
otherwise, the machine may not operate correctly.
Item Description
SMB Print Select whether or not the SMB printing (Windows printing) service
is used.
NetBIOS Name* Type the NetBIOS name in uppercase letters (up to 15 characters,
including only -).
Print Service Name* Type the name of the print service in uppercase letters (up to 12
characters, excluding / and \).
Workgroup* Type the name of the workgroup in uppercase letters (up to 15 char-
acters, excluding “ \ ; : , * < > | + = and ?).