Konica Minolta bizhub C451 - Manual (Page 229)

Administrator mode 3
C451 3-120
TCP Socket Setting
Specify the TCP socket settings. TCP socket is used during data transmis-
sions between the computer application and the machine.
2
Reminder
If the TCP socket setting is changed, be sure to turn the machine off, then
on again.
When the machine is turned off, then on again, turn the machine off with
the sub power switch before turning off the main power switch. In addi-
tion, wait at least 10 seconds to turn the machine on after turning it off;
otherwise, the machine may not operate correctly.
If “Enhanced Security Mode” is set to enable, the “Use SSL/TLS” check
box is selected.
Item Description
TCP Socket/
Port Number Select whether or not TCP socket is used. To use SSL/TLS, select
the check box, and then type in the port number. (Range: 1 to
65535)
Use SSL/TLS
Port No. (SSL) Select whether or not SSL/TLS is used. To use SSL/TLS, select the
check box, and then type in the port number. (Range: 1 to 65535)
TCP Socket (ASCII Mode)/
Port No. (ASCII Mode) To use in the Flash format, select the “TCP Socket (ASCII Mode)”
check box. Type in the port number. (Range: 1 to 65535)