Konica Minolta bizhub C451 - Manual (Page 23)

Overview 1
C451 1-2
Access PageScope Web Connection
PageScope Web Connection can be used from a Web browser.
1
Start the Web browser.
2
In the “Address” bar, type the IP address of this machine, and then
press the [Enter] key.
– http://<IP_address_of_machine>/
Example: If the IP address of this machine is 192.168.1.20
http://192.168.1.20/
– If the machine is set to use IPv6, type in an IPv6 address within [ ]
when using a browser other than Internet Explorer.
http://[IPv6_address_of_machine]/
Example: If the IPv6 address of this machine is
fe80::220:6bff:fe10:2f16
http://[fe80::220:6bff:fe10:2f16]/
– If the machine is set to use IPv6 and Internet Explorer is being used,
first edit the hosts file to include “fe80::220:6bff:fe10:2f16IPv6
IPv6_MFP_1”, and then specify the URL with the domain name.
The User mode page that appears is for a user who has logged on.
!
Detail
If user authentication settings have been specified, the user name and
password must be entered. For details, refer to “Logging on as a regis-
tered user” on page 1-11.
For details on specifying the IP address of this machine, refer to the Us-
er’s Guide [Network Scanner Operations].
PageScope Web Connection has Flash and HTML display formats. For
details, refer to “Logging on and logging off” on page 1-6.
Web browser cache
The most recent information may not appear in the PageScope Web Con-
nection pages because older versions of pages are saved in the cache for
the Web browser. In addition, problems may occur when the cache is used.
When using PageScope Web Connection, disable the cache for the Web
browser.