Konica Minolta BIZHUB C30P - Manual (Page 85)

6 Configuring PageScope Net Care Settings
74
2. In the Status to Notify section, select the device errors and
warnings for which you want to receive mail. In the Recovery to
Notify section, the contents of the e-mails that you wish to receive
when the unit recovers from an error can be set separately for a
device error and for a warning. Note, however, that
Receive
Device Status Notification check box of the Notification
Section must be selected before you can change the settings of the
Status to Notify section.
3. After everything is the way you want, click the Apply button. To
cancel the operation, click the Cancel button instead of Apply .
Command Mail Syntax
Command mail is e-mail with specific text in the subject line. A help
message containing details on the use of the commands can be received
from the server if an e-mail with the subject and body lines left blank is
sent to a mail address registered as a mail server.
To: <PageScope Net Care server mail address>
Subject: get <option> <device IP address>
Body Text: <blank>
Error Warning
• Fatal Error • Low Toner
• Paper Jam • Low Paper
• Toner Empty • Output Near Full
• Paper Empty • Off Line
• Output Full • Overdue PM
• Device Missing • Other Warning
• Other Error —