Konica Minolta BIZHUB C30P - Manual (Page 86)

6 Configuring PageScope Net Care Settings
75
Example: When the device IP address is 192.9.200.100
*Indicates the month received
Important!
Information Obtained
by Mail Command
Example Subject
Device Status get -s 192.9.200.100
Network Configuration
Information get -n 192.9.200.100
System Information get -y 192.9.200.100
Print Information get -d 192.9.200.100
Scanner Information get -c 192.9.200.100
Print Count get -j* 192.9.200.100
Jam Count get -j* 192.9.200.100
Service Call Count get -e* 192.9.200.100
Managed Device List get -l
• Always send command mail from the registered mail address of
the user. Command mail sent from an unregistered mail address
is ignored.
• Registered users cannot obtain the settings for all devices if
Display of unsettable devices , Display of Counter
Information , or Display of Job Information below Permission
Setting is set to Disabled (as described in “6.14 Specifying
Security Settings for PageScope Net Care” (p. 76)).