Konica Minolta BIZHUB C30P - Manual (Page 26)

3 Using PageScope Net Care Client
15
3 Using PageScope Net Care Client
The following operation is explained using the Java mode.
3.1 Starting Up Client
Start up your Web browser and access the URL shown below.
http://server_name:port_number/
In place of “server_name” in the above URL, type in the name or IP
address of the host that is running the PageScope Net Care server.
Example: When the IP address of the PageScope Net Care server is
192.9.200.200 and the port number is 9090 (the default port number is
“9090”.)
http://192.9.200.200:9090/
Note
• If SSL Enabled/Disabled in the SSL Setting section is set to
Enabled (as described in “6.14 Specifying Security Settings for
PageScope Net Care” (p. 76)), the URL becomes “https://
<
server_name >:< port_number >/”.