Konica Minolta BIZHUB C30P - Manual (Page 71)

6 Configuring PageScope Net Care Settings
60
To copy a custom group
1. On the Custom Group Setting screen, select the name of group
you want to copy (in the HTML mode, select the check box to the
left of the group name), and then click the
Copy button.
2. Type the name of the copy into the Group Name box.
Important!
3. After everything is the way you want, click the Apply button. To
cancel the operation, click the Cancel button instead of Apply .
To delete a custom group
1. On the Custom Group Setting screen, select the name of group
you want to delete (in the HTML mode, select the check box to the
left of the group name), and then click the
Remove button.
2. If a confirmation dialog box appears, click the OK button to delete
the custom group. To cancel the operation, click the Cancel button
instead of Apply .
• The name you assign to the copy cannot be the same as the
name of an existing custom group. Make sure the group name
you assigned to the copy is a unique name.