Xerox DocuColor 3535 con Fiery EX3535-14735 - Manual (Page 5)

Xerox Recommended Material List (Europe) Revision 1.3 June, 2003
Bypass
Paper Type
System
Setting Paper Type Weight Re-Order # Type Size
1 2 3 4 3 4 5
Please use the DC 3535 Recommended Media List in conjunction with the DC
3535 user guide and the DC3535 paper tray settings document.
Updates to this Recommended Media List will be found on www.xerox.com,
select "Country", then "Supplies".
Additional Information
IQ=Image Quality System Setting. Refer to DC3535 User Guide section 4 for
settings information.
Hint: (1 with IQ=21) below means Paper type system setting=1 and Image quality
System Setting=21. Other system setting numbers are indicated in the same
manner for Tray 5(Bypass).
TRAYS 1-4
Option 1
3 Tray
Option 2
Hi Cap
A=Auto Duplex M=Manual Duplex
S=Simplex Only
Trays 1,2,3,4 & 5: Plain/Bond/Recycled (64-98gsm) Transparency
Heavyweight 1 (99-169gsm) Coated 1 (120-169gsm) Heavyweight 2 / Coated 2 (170-220gsm) Label
Paper Types are selected within system settings.
Media
Alternative Gloss Setting (applicable to all media run from trays 1-4)
Note: Productivity will be decreased to enhance gloss
DC 3535
RML
EUROPE
3R97184 A4 A
3R97185 A3 A
36 Coated 1 Gloss 3R97186 SRA3 M
3R97187 A4 A
3R97188 A3 A
36 Coated 1 Gloss 3R97189 SRA3 M
3R97190 A4 M
3R97191 A3 M
3R97192 SRA3 M
3R97193 A4 M
3R97194 A3 M
3R97195 SRA3 M
3R95451 A4 M
3R95452 A3 M
3R95453 A3+ M
3R95849 SRA3 M
3R95454 A4 M
3R95455 A3 M
3R95456 A3+ M
3R95850 SRA3 M
23 Coated 2
33 Heavyweight 2A
3R93872 1-up A4 S S S S S S S
3R95813 4-up A4 S S S S S S S
3R93874 8-up A4 S S S S S S S
3R93875 14-up A4 S S S S S S S
3R95815 21-up A4 S S S S S S S
3R97524 24-up A4 S S S S S S S
Label Mode Labels are not intended as sole application of machine.
160 gsm A4
120gsm
3R95538
Pre-Scored
Paper Types can be selected within system settings or from the printer driver. If
system settings are used Coated 2 should be displayed on the user interface.
Environmental conditions may require that this product be fed one sheet at a
time. Gloss variation can occur from machine rolls, especially on high area
coverage prints.
Paper Types can be selected within system settings or from the print driver. If system settings are
used Coated 1 or Coated 1 Gloss should be displayed on the user interface. For Tray 5(Bypass) use
Coated 1 or Alternative Gloss setting Heavyweight 2 (8 with IQ=30)side 1 (13 with IQ=35)side 2.
Environmental conditions may require that this product be fed one sheet at a time. Gloss variation can
occur from machine roll, especially on high area coverage prints.
Paper Types can be selected within system settings or from the print driver. If system settings are
used Coated 1 or Coated 1 Gloss should be displayed on the user interface. For Tray 5(Bypass) use
Coated 1 or Alternative Gloss setting Heavyweight 2 (8 with IQ=30)side 1 (13 with IQ=35)side 2.
Environmental conditions may require that this product be fed one sheet at a time. Gloss variation can
occur from machine roll, especially on high area coverage prints.
Xerox Digital Colour Colotech+ Matt
Coated Papers & Covers
21 (20)
Xerox Colour Copier/Laser Labels 17
Xerox Colotech+ Supergloss
140gsm
23 Coated 2 210gsm
170gsm
Coated 1 Gloss
21
36
23 Coated 2
21 Coated 1
Coated 1
Coated 1 (F)
135gsm
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Coated 2 or Heavyweight 2 should be displayed on the user interface. Environmental conditions
may require that this product be fed one sheet at a time. Gloss variation can occur from machine rolls,
especially on high area coverage prints. For Tray 5(Bypass) use Coated 2 or Heavyweight 2 (8 with
IQ=27). Preference for Coated 1 or Coated 1 Gloss may occur.
M
160gsm
Coated 2
Heavyweight 2A
23
33
For the most recent version of this list visit our website at www.xerox.com, select ''Country'', then ''Supplies''.