Xerox 770 Digital Color Press con Xerox EX Print Server powered by Fiery-15993 - Manual (Page 2)

Page 2 of 2
©2011 Electronics for Imaging, Inc. Customer Support Release Note Template v1.2
c. Jobs with Coil Punch finishing will be delivered to the HCS
Stacker, if attached. Otherwise, they will be delivered to the
Finisher Stacker (no HCS attached).
Before installing 1-1EIPSL.exe
1. The following prerequisite(s) must be installed in the order specified before
applying the 1-1EIPSL.exe patch:
 1-1EBR6M
2. This patch is exclusive, it must be installed by itself, and the server must be
rebooted or restarted once. After that, other patches can be applied to the server.
1. This patch is also available from Fiery’s System Updates. Please check System
Updates Log section to confirm that patch is not already installed.
Patch installation instructions
2. Make sure that the Fiery printer controller reaches Idle.
3. Execute 1-1EIPSL.exe and follow the instructions in the Fiery Patch Downloader.
4. Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
5. After the patch is downloaded, and when prompted by the Fiery Patch
Downloader, choose Restart now or Reboot. (If you choose to Restart later,
make sure you manually reboot the server for the changes to take effect)
6. Wait until the Fiery controller reaches Idle and print the Configuration page.
7. Verify that the System Updates Log section contains the patch number
1-1EIPSL.
Additional Information:
For additional information, please refer to Customer Release Notes for FreeFlow
connectivity with Fiery EX Print Server for Xerox 770 Digital Color Press.