Xerox DocuColor 3535 avec Fiery EX3535-12518 - Manual (Page 5)

Page 4
(Bypass)
hint: (1 with IQ=21) below means system settings paper type 1 and image quality 21, other system
setting numbers are indicated in the same manner.
1 2 3 4 3 4 5
A=Auto Duplex M=Manual Duplex
S=Simplex Only PCW=Post Consumer
Waste ECF=Elemental Chlorine Free
IQ=Image Quality System Setting
Media
Alternative Gloss Setting (applicable to all media run from trays 1-4)
Mode
Paper Type
System
Setting Weight
Trays
Trays 1,2,3,4 & 5: Plain/Bond/Recycled (64-98gsm) Transparency
Heavyweight 1 (99-169gsm) Coated 1 (120-160gsm) Heavyweight 2 / Coated 2 (170-220gsm) Label
Paper Types are selected within system settings.
Additional Information
Option 2
Hi Cap Size Re-Order #
Option 1
3 Tray
Note: Productivity will be decreased to enhance gloss.
RML
DC3535
North America
Type
27 Heavyweight 1C
34 Gloss 1C
28
Heavyweight
1S
3R12064 8.5 x 11 A
3R12065 (3-hole) 8.5 x 11 A
3R12063 17 x 11 A
28
Heavyweight
1S
3R6339 8.5 x 11 S
3R12059 8.5 x 11 S
3R12315 17 x 11 S
25
Heavy Weight
1A
163gsm 3R4885 9.25 x 11.75 S
23 Coated 2 176gsm 3R5570 9.25 x 11.75 S
33 Heavyweight 2A 3R12348 8.5 x 11 S
28 Heavyweight 1B 3R12398 8.5 x 11 S S
28 Heavyweight 1B 3R12397 11 x 17 S S
Docucard Short edge feed
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Heavyweight 1S or Heavyweight 1A should be displayed on the user interface. For Tray 5(Bypass)
use Heavyweight 1 (1 with IQ=22) for 1S or Heavyweight 1 (1 with IQ=19) for 1A. Environmental
conditions may require that this product be fed one sheet at a time. Gloss variation can occur from
machine rolls, especially on high area coverage prints. Limit to short runs.
Paper Types can be selected within system settings or from the printer driver. If system
settings are used Heavyweight 1A should be displayed on the user interface. For Tray
5(Bypass) use Heavyweight 1 (1 with IQ=19)side 1
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Coated 2 should be displayed on the user interface. Environmental conditions may require that
this product be fed one sheet at a time. Gloss variation can occur from machine rolls, especially on high
Paper Types can be selected within system settings or from the printer driver. If system
settings are used Heavyweight 1C or Gloss 1C should be displayed on the user interface. For
Tray 5(Bypass) use Heavyweight 1 (1 with IQ=21)side 1 (12 with IQ=25)side 2 or Heavyweight 2
(8 with IQ=28)side 1 (13 with IQ=33)side 2
It is not recommended that you output more than 20 transparencies at a time.
If your job is larger than 20 pages, use Transparency Separators feature.
Paper Types can be selected within system settings or from the printer driver. If system settings are
used Heavyweight 1S or Heavyweight 1A should be displayed on the user interface. For Tray 5(Bypass)
use Heavyweight 1 (1 with IQ=22)side 1 (12 with IQ=31)side 2 for 1S or Heavyweight 1 (1 with IQ=23)side
1 (12 with IQ=23)side 2 for 1A. User preference may dictate mode. Environmental conditions may
require that this product be fed one sheet at a time. Gloss variation can occur from machine rolls,
S 3R12327
A A A A A A 8.5 x 11 A
Xerox Docupac Folders
Xerox Docupac Folders
Xerox Digital Color Dura
Paper
Xerox Digital Color Clear
Transparency
8.5 x 11 S
10pt
3R12310
Xerox Digital Color
Window Decals
25
25
Xerox Digital Color Trifold
Brochures
120 gsm
Transparency Mode 5 S S S S S
Heavyweight
1A
Heavyweight
1A
Load Media in the Short Edge feed orientation, 50 sheets max, with the stripe on the sheet as
the lead edge (side to be imaged = stripe side) Remove sheets from the output tray / finisher,
every 20 copies.
Digital EA Color Transfer
Paper
WARRANTY DISCLAIMER
Xerox makes no guarantees or warranties, either express or implied, concerning the performance, use or replacement of non-Xerox branded media or throughput products. Customers should inquire
directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media product for the first time, customers are advised to purchase small
quantities to insure that their expectations are met.
The quality of Xerox supplies is consistent from ream to ream, carton to carton, and it is backed by a Xerox 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream or
carton to carton, so for optimum performance on Xerox color equipment, use only the best--Xerox Supplies. To learn more about the benefits of using Xerox Supplies. please contact your Supply
Account Manager or call, in the US 1-800-822-2200 and in Canada 1-800-668-0199
(English) or 1-800-668-0133 (Francais).
© 2003 Xerox Corporation. All rights reserved.
Xerox® and all Xerox product names and product names and product numbers mentioned in this publication are trademarks of Xerox Corporation. Other company trademarks are also acknowledged.
For the latest in Xerox Supplies, contact your local Xerox Distributor, or call Xerox at 1-800-822-2200 in the USA, or call 1-800-668-0199 in Canada. .