Xerox DocuColor 2240-1552 - Manual

Retrieving Scanned Documents Using Scan Driver - 1 of 4
Fig. 1
Select
Properties .
Fig. 2
Select
Port Status .
Fig. 3
Place a check mark in the “Enable” box next to
Salutation . Select
pply New Settings . A
*
If a check mark already appears in the “Enable” box next to Salutation
skip the remaining steps in this pamphlet and continue to Retrieving
Scanned Documents Using Scan Driver Part 2 of 2.
Fig. 4
Enter the User Name and Password. Click
OK . (See Machine
Administration User Guide for default password)
*This screen might not appear if the username and password have
already been entered.
Fig. 5
The “Settings have been changed” confirmation screen appears. Click
Reboot .
Fig. 6
Click
OK (The DC 1632/2240 will take approximately 2 minutes to
reboot.)