Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 8)

Overview
1-2 Xerox 4112/4127 EPS
System Administration Guide
User Interface
The User Interface (UI) consists of the Touch Screen and the Control Panel.
The Touch Screen is located at the center of the UI. Messages required for operation and
feature buttons are displayed on this display. You can directly touch the buttons and tabs
displayed on the touch screen to set features or to instruct operations in screens.
When a print job is submitted from the Controller, the machine status, such as out of paper,
toner low, paper jam, starting and completing the job, will be displayed. It also allows the users
to confirm the print data processing status, and to pause, restart, and stop the print jobs.
Xerox FreeFlow Print Server Controller
The Controller also allows the user to start, stop, and delete print jobs. It provides all of the
operations necessary to control and print jobs including the setting up of properties for the print
job, the managing of jobs in the queue, job status information, and security and authentication
information.
Power on/off
Switch the power on before operating the machine. After the power is on, the machine will take
about 5 minutes to warm up before you can start printing.
Turn the machine off at the end of the day or when it is not in use for a long period of time. Use
the Power Saving feature when the machine is not in use for a while to reduce power
consumption.
Note
If the power is off, all functions of the machine will stop.
Powering on
• Open the power switch cover and press the power switch to the [ | ] position to turn the
power on.
Note
The “Please wait...” message indicates that the machine is warming up. The machine
cannot be used while it is warming up.