Xerox 4112-4127 Enterprise Printing System-4611 - Manual (Page 86)

Setups
3-70 Xerox 4112/4127 EPS
System Administration Guide
Port Settings
Select the interface by which the machine is connected to the client. In Port Settings, you can
set the following items:
Protocol Settings
Select the parameters that are required for communications between the machine and client
workstations. In Protocol Settings, you can set the following items:
Machine E-mail Address/Host Name
Select the e-mail address and host name for this machine. In Machine E-mail Address/Host
Name, you can set the following items:
1. E-mail Address
2. Machine Name
3. Host Name
4. Domain Name
LPD Receive E-mail
NetWare Send E-mail
SMB E-mail Notification Service
IPP UPnP Discovery
EtherTalk WSD
Bonjour Internet Services (HTTP)
Port9100 SOAP
SNMP WebDAV
FTP Client
Ethernet Rated Speed IPv6 Address Manual Configuration
TCP/IP - IP Mode Manually Configured IPv6 Address
IPv4 - IP Address Resolution Manually Configured IPv6 Address Prefix
IPv4 - IP Address Manually Configured IPv6 Gateway
IPv4 - Subnet Mask Automatically Configured IPv6 Address
IPv4 - Gateway Address IPv6 - IP Filter
IPv4 - IP Filter